Your SoCal San Diego E.B.R. Source!

Important Links

New Products [more]

DPMS AR-10 Rifle Buffer Spring

$7.99

JP/VTac Modular Forearm System for DPMS LR-308

$175.00

Magpul PRS AR-10 or DPMS Style A2 Stock

$225.00

Information

Proud Member

Home :: Optics, Lasers, Mounts & Bipods :: Scopes :: UTG 4X20 Combat Style Model 15 Illuminated Mil-dot with BDC

Scopes

Product 4/7

UTG 4X20 Combat Style Model 15 Illuminated Mil-dot with BDC

$44.95

Detail Information:

•	Mil-Dot Range Estimating Reticle with High Quality RGB Side Wheel Illumination for Clear Twilight Vision
•	One-piece Outer Tube with Integral Carry Handle See-thru Mount for Maximum Strength and Precision
•	Built-in Bullet Drop Compensator (BDC) for 100 to 500 Meters Usage of .223 or 5.56 NATO ROUND
•	Superior Quality Precision Lens Elements
•	Aircraft-grade Aluminum Tube with Scratch Resistant Hard-coat Anodized Black Matte Finish
•	Complete with High Quality Picatinny/Weaver Flat-top Adaptor and Flip-open Lens Caps

Magnification:	4X
Tube Diameter:	Other
Objective Diameter:	20mm
Field of View @ 100 yards:	28.0'
Eye Relief:	3.3"
Exit Pupil:	6.0mm
Click Value @100 yards:	1/4"
Length:	177mm
Weight:	11.3 oz
Parallax Setting:	100 Yds
Batteries:	CR1620 3V

A:	176mm
B:	N/A
C:	N/A
D:	N/A
E:	69mm
F:	41mm
G:	33.71mm
H:	33.81mm
I:	N/A

In the past few years, Range Estimating reticle has begun to be recognized as a very useful tool by hunters and shooters around the world. With some patient learning and practices, this tool can enhance shooting accuracy and performance in ways not imagined before. Staying ahead of the trend, Leapers offers two most unique Range Estimating reticles, TRE and ARE, to our customers and continue to develop more for the future.

Regular mil-dot reticle found on the market usually has 4 dots on each direction of the cross hair, giving you 9 different aiming points for either windage or elevation. If you count the 2 inner tips of the opposite duplex cross hairs, you get 11 aiming points. Leapers’s own 24 Mil-Dot Reticle (TRE) has 6 dots on each direction of the cross hair, giving you 13 aiming points or 15 including the inner tips of the duplex cross hairs.

Mil-Dot Range Estimating:

Range estimating requires common knowledge/experience about your target's actual width or height.
Set your scope at 10X or the proper power, depending on the scope. View the target through the scope. Place the center of the dot against one edge of the target and measure to the opposite edge of the target.

Once the target has been measured in mils, depending on the scope model, a formula is available to estimate the distance of the target.
Each scope will come with a pre-calculated mil-dot table of most used distance estimates to aid the user.

Mil-Dot Range Estimating Example:

For example, based on past experiences, the length of a known animal from shoulder to tail is 40 inches (1.016 meters), and we see a scope to find that it occupies 5 mils. Therefore, the distance can be derived from using this scope's formula below -

	(Height or Width of Target in Meters) x 1,000	= Range in Meters (1 M = 1.0936 Yards)
	2 x (Height or Width of Target in Mils.)
	Hence, (1.016 x 1,000) / (2 X 5) = 101.6 meters (110 yds). Armed with this knowledge, you can compensate for the bullet’s drop accordingly and make “great things happen”!

SWAT Illumination

Side wheel adjustable turret opposite to the windage adjustment turret, controls different levels of red or green illumination in reticle, or turns off to return to black reticle, accommodates diverse weather/light conditions.